Inconel 600 Plates Supplier, Stockist in Poland
Inconel Alloy 600 Perforated Sheets, Nickel Alloy 2.4816 Cold Rolled Sheet , Inconel 2.4816 Shim Sheet in Kielce, Alloy 2.4816 Chequered Plates in Radom, Nickel Alloy UNS N06600 Shim Sheet Stockist in Ostrowiec, UNS N06600 Nickel Alloy Chequered Plate Manufacturer in Starachowice, Poland, ASTM B168 UNS N06600 Inconel Alloy Cold Rolled Plates in Skarżysko-Kamienna, Alloy ASTM B168 UNS N06600 Cold Rolled Plate Stockist in Kielce, Nickel Alloy ASTM B168 UNS N06600 Perforated Sheets Distributor in Warsaw, Poland, Alloy ASME SB168 UNS N06600 Chequered Plate Distributor.
Table of Contents
- About Inconel Alloy 600 Plate Manufacturer
- Inconel Plate Specification in Poland
- Finishes Of Inconel Alloy Plate in Poland
- ANSI B16.9 Inconel Alloy Plates Forms & Availability in Poland
- Equivalent Grades Inconel Alloy Plate in Poland
- Chemical Composition of Inconel 600 Plates in Poland
- Mechanical Properties of Inconel Alloy Plate in Poland
- Price List of ANSI B16.9 Inconel Plates in Poland
- Inconel 600 Plates Ready Stock in Poland
- Inconel Plates Production Range in Poland
Inconel Alloy 2.4816 Circle, 600 Inconel Strips, Inconel 600 Chequered Plates Stockist in Kielce, Poland, 600 Inconel Perforated Sheets Stockist in Radom, Poland, ASME SB168 600 Nickel Alloy Cold Rolled Sheet Exporter in Ostrowiec, Inconel ASME SB168 2.4816 Chequered Plate Distributor in Starachowice, ASME SB168 2.4816 Inconel Alloy Cold Rolled Plates Manufacturer in Skarżysko-Kamienna, Poland, Inconel Alloy ASTM B168 600 Hot Rolled Sheet Exporter in Warsaw, Inconel Alloy 2.4816 Hot Rolled Sheets Distributor in Ostrowiec, Inconel Alloy 600 Chequered Plate Stockist.
Kalikund Steel & Engg. Co. is a distinguished manufacturer, distributor, stockholder and exporter of Inconel UNS N06 UNS N06600 Sheets in Kielce, Poland.
Inconel UNS N06600 Sheets are widely sought after by industries that need extremely long lasting materials that does not downgrade or corrode. The Inconel UNS N06600 Plates manufactured here includes of Nickel and Chromimum that has a good corrosion resistance and are even applicable in systems of high temperature. These alloy of nickel is especially formulated to be utilized for service temperature from cryogenic to extreme temperature ranging from 2000 degree Fahrenheit. Inconel UNS N06600 Plate is non – magnetic, has good mechanical qualities, and gives the required concentration of high strength and fine weldability across a wide temperature range. Once the solution has been annealed at 1020 – 1100° Celsius, it is water quenched. Furthermore, it is quite weldable. Alloy 2.4816 Plates has a thick, permanent, passivating oxide on its surface when heated. This coating formed on the metal’s surface protects it from further damage.
Some of the features of our Inconel 2.4816 Plate is, the material is resistant to a broad variety of corrosive substances, about resistant to chlorine ion stress corrosion cracking, non-magnetic, outstanding mechanical characteristics, great strength and weldability across a wide temperature range. As these Inconel 600 Plates has all this properties they are used in several industrial applications like Dissolving fuel element, Offshore product pipeline systems, Seawater-cooled heat exchangers, Heat exchangers, evaporators, scrubbers, dip pipes, and other sectors like, petroleum refineries, air-cooled heat exchangers, Food and Water Desalination.
We produce these Inconel Sheets by using all the advanced machinery, under close supervision of our skilled team. To retain sophisticated quality of these Plates, we ensure that they undergo quality tests like, mechanical tests, nondestructive tests, hardness tests, tensile tests, and positive material tests. Other tests involve the micro and macro test, radiographic examination, and ocular inspection and others. We are well known for delivering error free products in Radom. Inconel 2.4816 Plate is stocked in large scale for immediate requirements from our buyers around the globe. This Inconel Sheets are packed with maximum caution to avoid damage during delivery.
Inconel Alloy Plate Specification in Poland
| 600 Sheets & Plates Specifications | ASTM B168 / ASME SB168, BS EN 10088-2, en 10028-7, IS 6911 |
|---|---|
| 600 Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Inconel 600 Sheets & Plates Size Range | Cold rolled ASME SB168 Grade 600 Inconel Sheet 0.5-6.4 mm Hot rolled ASME SB168 Grade 600 Inconel Sheet 3.0–10.0 mm |
| 600 Inconel Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Inconel 600 Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Inconel 600 Sheets & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Inconel 600 Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) of Inconel 600 Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SB168 600 Inconel Strips EN 10088 SA -240-600 Strips |
| Finish of Inconel 600 Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Inconel 600 Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Finishes Of Inconel Alloy Plates in Poland
| Surface Finish | Definition | Application |
|---|---|---|
| 2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
| BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
| NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
| NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
| HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
| NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
ANSI B16.9 Inconel Plates Forms & Availability in Poland
| Products | Size | |
| ASTM B168 600 Inconel Perforated Sheet | ASTM B168 600 Inconel Plates | Sizes 3.0–10.0 mm |
| ASTM B168 600 Inconel Sheet | ASTM B168 600 Inconel Chequered Plate | |
| ASTM B168 600 Inconel Coils | ASTM B168 Inconel Alloy 600 Foils | |
| ASTM B168 600 Inconel Shims | ASTM B168 600 Inconel Polished Plates | |
| ASTM B168 600 Alloy Hot Rolled Plates | ASTM B168 600 Inconel Cold Rolled Plates | |
| ASTM B168 Inconel Alloy 600 Strips | ASTM B168 600 Inconel Roof Sheets | |
| ASTM B168 600 Alloy Metal Sheet | ASTM B168 600 Inconel Polished Texture Sheet | |
| ASTM B168 Inconel Alloy 600 Cut to Size | ASTM B168 600 Inconel Circle | |
| ASTM B168 600 Inconel Discs | ASTM B168 600 Inconel Blank | |
Inconel Plates has the following advantages in Poland
- Outstanding general corrosion resistance and superior strength
- Outstanding sulfide stress corrosion resistance
- Resistance to chloride pitting and crevice corrosion
- Superior protection to chloride stress corrosion cracking
- Superior weldability and formability
Few of Our Specialities which make us a profitable Business Partner for our customers are
- Customer centric approach
- Superior quality products
- Timely deliveries
- Customized Size & Specification
- Competitive Prices
Equivalent Grades Inconel Plate in Poland
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Chemical Composition of Inconel Alloy 600 Plates in Poland
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Mechanical Properties of Inconel Plates in Poland
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Inconel Alloy Plate Production Range in Poland
600 Sheet Exporter in Skarżysko-Kamienna
600 Sheets Manufacturer in Starachowice
Alloy 600 HR Sheets Stockist in Radom
Inconel Alloy ASTM B168 2.4816 Sheets Supplier in Poland
ASTM B168 UNS N06600 Alloy Sheet Manufacturer in Kielce
Nickel Alloy 2.4816 Sheet Distributor in Ostrowiec
Alloy 600 Cold Rolled Sheets Production Range Exporter in Poland
ASTM B168 Inconel Alloy 2.4816 Sheet Exporter in Kielce
Inconel ASTM B168 UNS N06600 Hot Rolled Sheets Stockist in Ostrowiec
2.4816 Alloy HR Sheets in Warsaw
ASTM B168 600 Hot Rolled Sheets Exporter in Radom
Inconel UNS N06600 Cold Rolled Sheets Manufacturer in Starachowice
UNS N06600 Cold Rolled Sheets Exporter in Skarżysko-Kamienna
ASTM B168 Nickel Alloy 600 Sheet Exporter in Warsaw
UNS N06600 Nickel Alloy CR Plates in Warsaw
Inconel Alloy ASTM B168 UNS N06600 HR Plates Distributor in Poland
UNS N06600 Hot Rolled Plates Supplier in Skarżysko-Kamienna
ASTM B168 Inconel Alloy UNS N06600 Plate Manufacturer in Warsaw
ASTM B168 600 Nickel Alloy Cold Rolled Plates Distributor in Kielce
ASTM B168 UNS N06600 Cold Rolled Plates Exporter in Radom
600 Plate Exporter in Skarżysko-Kamienna
UNS N06600 Plates Manufacturer in Starachowice
Inconel 600 CR Plates Exporter in Radom
Nickel Alloy ASME SB168 2.4816 Plate Supplier in Ostrowiec
Nickel Alloy 600 Hot Rolled Plates Supplier in Ostrowiec
Nickel Alloy 2.4816 Plates Stockist in Starachowice
Nickel Alloy UNS N06600 Hot Rolled Plates Production Range Distributor in Poland
ASTM B168 Alloy UNS N06600 Plate Stockist in Kielce
ASTM B168 Nickel Alloy UNS N06600 Coil Stockist in Warsaw
Inconel Alloy 2.4816 Cold Rolled Coils Exporter in Radom
Alloy ASME SB168 600 Hot Rolled Coils Supplier in Ostrowiec
600 Coil Supplier in Skarżysko-Kamienna
UNS N06600 Alloy CR Coils in Warsaw
Inconel Alloy 600 HR Coils Manufacturer in Starachowice
Alloy UNS N06600 CR Coils Production Range Stockist in Poland
UNS N06600 Coils Exporter in Skarżysko-Kamienna
600 Coil Exporter in Starachowice
ASME SB168 Alloy UNS N06600 Coils Manufacturer in Kielce
ASME SB168 600 Nickel Alloy Hot Rolled Coils Distributor in Kielce
Alloy 2.4816 Cold Rolled Coils Distributor in Ostrowiec
ASTM B168 2.4816 Hot Rolled Coils Stockist in Radom
Nickel Alloy ASTM B168 2.4816 Hot Rolled Coils Stockist in Poland
Inconel ASME SB168 UNS N06600 Foil Exporter in Poland
ASME SB168 2.4816 Foils Manufacturer in Radom
2.4816 HR Foils Distributor in Skarżysko-Kamienna
UNS N06600 Foil Stockist in Starachowice
600 Foils Stockist in Skarżysko-Kamienna
ASTM B168 Inconel 2.4816 Hot Rolled Foils Distributor in Warsaw
Nickel Alloy ASTM B168 600 Hot Rolled Foils Supplier in Ostrowiec
Nickel Alloy 600 HR Foils Distributor in Ostrowiec
ASTM B168 Inconel Alloy 600 Cold Rolled Foils Manufacturer in Kielce
UNS N06600 Inconel Alloy Foil in Warsaw
Inconel UNS N06600 Cold Rolled Foils Manufacturer in Starachowice
Alloy UNS N06600 HR Foils Production Range Stockist in Poland
ASTM B168 600 Nickel Alloy Foil Stockist in Kielce
Inconel UNS N06600 Hot Rolled Foils Stockist in Radom
ASTM B168 Nickel Alloy UNS N06600 Cold Rolled Strips Stockist in Warsaw
Nickel Alloy 600 Cold Rolled Strips Distributor in Ostrowiec
Inconel Alloy ASTM B168 2.4816 Cold Rolled Strips Distributor in Poland
ASTM B168 2.4816 Hot Rolled Strips Manufacturer in Radom
UNS N06600 HR Strips Distributor in Skarżysko-Kamienna
ASTM B168 UNS N06600 Inconel Hot Rolled Strips Exporter in Kielce
Alloy ASME SB168 UNS N06600 Strip Distributor in Ostrowiec
ASTM B168 Nickel Alloy 2.4816 CR Strips Distributor in Kielce
UNS N06600 Strip Distributor in Skarżysko-Kamienna
600 Inconel Alloy CR Strips in Warsaw
Inconel 2.4816 Cold Rolled Strips Supplier in Starachowice
Nickel Alloy 600 Cold Rolled Strips Production Range Exporter in Poland
UNS N06600 Hot Rolled Strips Supplier in Starachowice
Inconel UNS N06600 Hot Rolled Strips Distributor in Radom
600 Shim Sheets Supplier in Skarżysko-Kamienna
600 Hot Rolled Shim Sheets Manufacturer in Starachowice
Alloy 2.4816 Hot Rolled Shim Sheets Distributor in Radom
ASTM B168 600 Inconel Alloy Shim Sheet Supplier in Kielce
600 Hot Rolled Shim Sheets Supplier in Skarżysko-Kamienna
2.4816 Inconel Alloy HR Shim Sheets in Warsaw
Nickel Alloy 2.4816 Hot Rolled Shim Sheets Exporter in Starachowice
Inconel Alloy 600 CR Shim Sheets Production Range Supplier in Poland
Nickel Alloy ASME SB168 600 Shim Sheet Manufacturer in Ostrowiec
ASTM B168 Alloy 600 Hot Rolled Shim Sheets Stockist in Kielce
ASTM B168 Alloy 2.4816 Shim Sheet Stockist in Warsaw
Inconel Alloy 600 Hot Rolled Shim Sheets Distributor in Ostrowiec
Inconel ASTM B168 2.4816 Hot Rolled Shim Sheets Stockist in Poland
ASME SB168 600 Hot Rolled Shim Sheets Supplier in Radom
Inconel Alloy 600 Chequered Plate Distributor in Ostrowiec
Nickel Alloy ASTM B168 UNS N06600 Cold Rolled Chequered Plates Distributor in Poland
ASME SB168 2.4816 Chequered Plates Distributor in Radom
2.4816 HR Chequered Plates Distributor in Skarżysko-Kamienna
UNS N06600 Cold Rolled Chequered Plates Distributor in Skarżysko-Kamienna
2.4816 Alloy Chequered Plate in Warsaw
Inconel Alloy 2.4816 CR Chequered Plates Exporter in Starachowice
Nickel Alloy 600 HR Chequered Plates Production Range Distributor in Poland
2.4816 Cold Rolled Chequered Plates Stockist in Starachowice
Nickel Alloy 600 CR Chequered Plates Exporter in Radom
Inconel ASME SB168 2.4816 Chequered Plate Supplier in Ostrowiec
ASME SB168 Alloy 2.4816 Hot Rolled Chequered Plates Exporter in Kielce
ASME SB168 2.4816 Inconel Hot Rolled Chequered Plates Supplier in Kielce
ASME SB168 Nickel Alloy 2.4816 Hot Rolled Chequered Plates Distributor in Warsaw
UNS N06600 Perforated Sheet Stockist in Skarżysko-Kamienna
2.4816 Nickel Alloy Hot Rolled Perforated Sheets in Warsaw
2.4816 Perforated Sheet Stockist in Starachowice
Inconel Alloy 2.4816 CR Perforated Sheets Manufacturer in Radom
Nickel Alloy ASTM B168 2.4816 Perforated Sheets Distributor in Ostrowiec
Inconel 2.4816 Hot Rolled Perforated Sheets Production Range Exporter in Poland
Inconel Alloy 2.4816 Perforated Sheet Stockist in Starachowice
ASTM B168 2.4816 Alloy Cold Rolled Perforated Sheets Manufacturer in Kielce
ASTM B168 Inconel 600 Perforated Sheet Distributor in Kielce
UNS N06600 HR Perforated Sheets Distributor in Skarżysko-Kamienna
Nickel Alloy UNS N06600 CR Perforated Sheets Distributor in Ostrowiec
Inconel ASME SB168 600 Hot Rolled Perforated Sheets Manufacturer in Poland
ASME SB168 600 Hot Rolled Perforated Sheets Manufacturer in Radom
ASME SB168 Inconel UNS N06600 Perforated Sheet Supplier in Warsaw
600 Circle Stockist in Skarżysko-Kamienna
2.4816 Inconel Alloy CR Circle in Warsaw
Nickel Alloy 2.4816 Hot Rolled Circles Supplier in Ostrowiec
Nickel Alloy ASME SB168 2.4816 CR Circle Supplier in Poland
ASTM B168 2.4816 Hot Rolled Circles Distributor in Radom
Inconel 600 Circles Production Range Stockist in Poland
Inconel Alloy 2.4816 Circle Manufacturer in Starachowice
ASTM B168 2.4816 Inconel Alloy Circles Distributor in Kielce
600 HR Circle Distributor in Skarżysko-Kamienna
ASTM B168 Nickel Alloy 600 Cold Rolled Circles Exporter in Warsaw
UNS N06600 Hot Rolled Circles Manufacturer in Starachowice
Inconel Alloy 600 Cold Rolled Circles Manufacturer in Radom
Alloy ASME SB168 UNS N06600 Circles Manufacturer in Ostrowiec
ASME SB168 Nickel Alloy 2.4816 HR Circle Supplier in Kielce
Price List of ANSI B16.9 Inconel Plate in Poland
Prices for Inconel Plate Products are very reasonable.
Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement. KALIKUND STEEL & ENGG. CO. maintains a stock of all standard products and can export them at the best price ASME SB168 UNS N06600 Inconel Alloy Shim Sheet etc.
Inconel Alloy 600 Plates Ready Stock in Poland
| Alloy 600 Cold Rolled Sheets Manufacturer in Warsaw | ASME SB168 Inconel Alloy 600 Cold Rolled Sheet Manufacturer in Starachowice |
| Inconel Alloy 600 Chequered Plate Manufacturer in Ostrowiec | ASME SB168 UNS N06600 Circle Manufacturer in Skarżysko-Kamienna |
| 2.4816 Cold Rolled Plates Exporter in Kielce | ASTM B168 2.4816 Perforated Sheets Supplier in Radom |
| Inconel Alloy 2.4816 Circle Stockist in Skarżysko-Kamienna | UNS N06600 Inconel Alloy Hot Rolled Coils in Starachowice |
| ASME SB168 Nickel Alloy UNS N06600 Hot Rolled Plates in Radom | Nickel Alloy 2.4816 Cold Rolled Sheet in Ostrowiec |
| ASME B16.9 Nickel Alloy UNS N06600 Cold Rolled Sheets in Kielce | Nickel Alloy UNS N06600 Cold Rolled Sheet Distributor in Poland |
| ASTM B168 600 Inconel Alloy Cold Rolled Sheet in Poland | Alloy UNS N06600 Hot Rolled Plates Manufacturer in Warsaw |
| ASTM B168 Nickel Alloy 600 Cold Rolled Plate Distributor in Ostrowiec | Alloy 600 Circle Distributor in Skarżysko-Kamienna |
| ASME SB168 2.4816 Perforated Sheet in Starachowice | 2.4816 Alloy Circle in Kielce |
| ASTM B168 UNS N06600 Alloy Shim Sheet in Warsaw | 2.4816 Inconel Alloy Perforated Sheet in Poland |
| ASME SB168 UNS N06600 Hot Rolled Sheets in Starachowice | Nickel Alloy 2.4816 Perforated Sheets in Skarżysko-Kamienna |
| ASME SB168 Alloy 2.4816 Chequered Plates in Ostrowiec | 600 Inconel Cold Rolled Plates in Radom |
| ASTM B168 Alloy UNS N06600 Chequered Plate Stockist in Kielce | 2.4816 Nickel Alloy Hot Rolled Plate in Poland |
| ASTM B168 Alloy 2.4816 Cold Rolled Plate in Poland | Sch 80 Inconel 2.4816 Perforated Sheets in Radom |
| Nickel Alloy UNS N06600 Chequered Plates Manufacturer in Poland | Nickel Alloy UNS N06600Welded Perforated Sheet Dealer in Warsaw |
| ASME SB168 Alloy UNS N06600 Perforated Sheet Exporter in Starachowice | ASME SB168 2.4816 Strips Supplier in Skarżysko-Kamienna |
| ANSI B16.9 Nickel Alloy 2.4816 Hot Rolled Sheet Supplier in Radom | UNS N06600 Nickel Alloy Shim Sheet Exporter in Kielce |
| 600 Nickel Alloy Hot Rolled Plate Dealer in Kielce | ASTM B168 Alloy 2.4816 Cold Rolled Sheets Distributor in Radom |
| Nickel Alloy 600 Cold Rolled Sheets Manufacturer in Starachowice | ASME SB168 Inconel Alloy 600 Hot Rolled Sheet Manufacturer in Ostrowiec |
| Inconel Alloy 2.4816 Perforated Sheets Exporter in Skarżysko-Kamienna | Supplier of 600 Perforated Sheet in Warsaw |
| ASTM B168 Inconel Alloy UNS N06600 Shim Sheet in Kielce | ASME B16.9 Alloy 2.4816 Circle Supplier in Starachowice |
| UNS N06600 Alloy Perforated Sheets Exporter in Ostrowiec | ASME SB168 2.4816 Inconel Alloy Cold Rolled Coils Manufacturer in Skarżysko-Kamienna |
| Alloy UNS N06600 Hot Rolled Sheets Manufacturer in Warsaw | ASTM B168 2.4816 Welded Cold Rolled Sheets Distributor in Poland |