Super Duplex Steel Pipe Fittings Supplier, Stockist in Japan
Super Duplex Stainless Steel S32760 Pipe Fittings Exporter in Japan, SDSS S32750 Seamless Buttweld Pipe Fittings in Tokyo, 2507 Buttweld Fittings in Osaka, Super Duplex Steel 1.4410 Pipe Fittings Stockist in Japan, SDSS S32750 Weldable Pipe Fittings Distributor in Amagasaki, Super Duplex Stainless Steel 2507 Pipe Fittings in Kobe, S32760 Buttweld Fittings Distributor in Kadoma, Super Duplex S32750 Buttweld Fittings Stockist in Sakai, 2507 Buttweld Pipe Fittings Distributor in Japan, S32760 SDSS Buttweld Fittings in Kobe, Super Duplex Stainless Steel UNS S32760 Buttweld Pipe Fittings in Japan.
Table of Contents
- About Super Duplex S32750 Buttweld Pipe Fittings Manufacturer
- Super Duplex Steel Buttweld Fittings Specification in Japan
- ANSI B16.9 Super Duplex Steel Buttweld Fittings Forms & Availability in Japan
- Equivalent Grades Super Duplex Steel Buttweld Pipe Fittings in Japan
- Chemical Composition of Super Duplex Steel 2507 Buttweld Fittings in Japan
- Mechanical Properties of Super Duplex Steel Butt weld Pipe Fittings in Japan
- Price List of ANSI B16.9 Super Duplex Steel Buttweld Pipe Fittings in Japan
- Super Duplex Seel 2507 Butt weld Pipe Fittings Ready Stock in Japan
- Super Duplex Steel Buttweld Pipe Fittings Production Range in Japan
- Super Duplex Steel Buttweld Elbow in Japan
- Super Duplex Steel Buttweld Tee in Japan
- Super Duplex Steel Buttweld Cross in Japan
- Super Duplex Steel Buttweld Reducer in Japan
- Super Duplex Steel Buttweld Pipe Cap in Japan
- Super Duplex Steel Buttweld Pipe Bend in Japan
Ready Stock of SDSS S32760 Buttweld Elbow Stockist in Osaka, Largest of Super Duplex Stainless Steel 1.4410 Buttweld Fittings in Sakai, Competitive Price of Super Duplex Stainless Steel UNS S32750 SR Elbow Japan, Super Duplex Stainless Steel 1.4410 Buttweld Pipe Fittings Manufacturer in Japan, S32750 Super Duplex Steel Pipe Elbow Manufacturer in Kobe, Super Duplex Steel 1.4410 Equal Tee Distributor in Amagasaki, ASTM A815 S32750 Buttweld Pipe Fittings in Osaka.
Kalikund Steel & Engg. Co. is a prominent Super Duplex Stainless Steel UNS S32750 \ UNS S32760 Pipe Fittings manufacturer, supplier, stockholder and exporter in Tokyo, Japan. Our Super Duplex Steel UNS S32760 Pipe Fittings are manufactured in compliance with globally accepted quality standards by utilizing superior quality raw materials and latest technology machinery under the supervision of our skilled team. We stock these Super Duplex UNS S32760 Pipe Fittings in a number of sizes, specifications, types, and also in customized configurations as per the requirements of various clients at the most reasonable prices across Osaka, Japan. We stock these Super Duplex Pipe Fittings in various forms like tee, cross, reducers, stub ends, caps, nipples, elbow, etc.
SDSS UNS S32760 Buttweld Pipe Fittings are especially designed for service in aggressive chloride-containing conditions, and have outstanding sulphide-stress corrosion cracking resistance in sour-gas environments. SDSS UNS S32750 Pipe Fittings has outstanding resistance to localized corrosion and stress corrosion cracking combined with high mechanical strength.
Super Duplex Steel S32760 Pipe Fittings are widely used in Hydropower, Heat Exchangers, Desalination Plants, Heat Exchangers, Subsea Pipework Systems, Valves and Pumps, Storage Tanks and Pressure Vessels, etc.
Super Duplex Stainless Steel UNS S32760 Pipe Fittings exhibit superior resistance to stress corrosion cracking in halide containing conditions, high resistance to pitting and crevice corrosion, superior general resistance to corrosion, high erosion corrosion and corrosion fatigue resistance, high mechanical strength, superior impact strength at sub-zero temperatures, etc.
At Kalikund Steel & Engg. Co. client satisfaction is our main goal our team of highly qualified professionals strive hard to make the products the best in the market. We are diligently engaged in the supply and export of various types of SDSS Pipe Fittings to majorly all regions in Japan such as Kobe, Amagasaki, Kadoma, etc. We carry out detailed testing on our pipe fittings. The tests performed to make sure the best standards include flattening test, raw material test, hardness test, 100% radiography, macro test, flaring test, chemical analysis, third party inspection, and Positive Material Identification testing. We perform these tests to make sure that the products are free from errors and suitable for use in various environments.
Super Duplex Stainless Steel Buttweld Pipe Fittings Specification in Japan
| Specifications | ASTM A815/ ASME SA815 |
|---|---|
| Size | Seamless Butt Weld Fittings : 1/2" – 10" Welded Butt Weld Fittings : 1/2" – 48" |
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Manufacturing Standards of Super Duplex Stainless Steel Buttweld Pipe Fittings in Japan
| ASME B16.9 ASTM A815 2507 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
ANSI B16.9 Super Duplex Stainless Steel Buttweld Fittings Forms & Availability in Japan
Seamless/ Welded 100% Radiography Tested
| Products | Size | |
| ASTM A815 Super Duplex Steel Elbow – Long Radius Stockist in Kadoma | ASTM A815 SDSS Stub Ends in Japan | Sizes 1/2″ – 48″ |
| ASTM A815 S32750 Super Duplex Elbow – Short Radius Stockist in Japan | ASME SA815 UNS S32760 Super Duplex Stainless Steel Cross in Amagasaki | |
| ASTM A815 1.4410 Super Duplex 3D Elbow in Osaka | ASME SA815 Super Duplex 5D Elbow Distributor in Amagasaki | |
| ASME SA815 S32750 Super Duplex Steel Reducing Elbow in Japan | ASTM A815 SAF 2507 Super Duplex Stainless Steel Reducing Cross Distributor in Osaka | |
| ASME SA815 UNS S32750 Super Duplex Stainless Steel 45° Elbow in Japan | ASME SA815 1.4410 Super Duplex Tees in Kobe | |
| ASME SA815 S32760 Super Duplex Steel Fabricated Tee in Japan | ASME SA815 UNS S32760 SDSS End Cap in Japan | |
| ASTM A815 UNS S32750 Super Duplex Reducer Manufacturer in Japan | ASME SA815 UNS S32760 SDSS Coupling in Kobe | |
| ASTM A815 SDSS Concentric Reducer in Japan | ASME SA815 Super Duplex Stainless Steel Eccentric Reducer Stockist in Tokyo | |
| ASME SA815 2507 Super Duplex Pipe Nipple in Japan | ASTM A815 1.4410 Super Duplex Welded Pipe Fittings Supplier in Kobe | |
Super Duplex Stainless Steel Buttweld Fittings has the following benefits in Japan
- Excellent general corrosion resistance and high strength
- Excellent sulfide stress corrosion resistance
- Immune to chloride pitting and crevice corrosion
- Higher protection to chloride stress corrosion cracking
- Superior weldability and formability
Some of Our Specialities which make us a profitable Business Partner for our clients are
- Client focused approach
- Superior quality products
- On time delivery
- Customized Size & Specification
- Reasonable Pricing
Equivalent Grades Super Duplex Stainless Steel Pipe Fittings in Japan
| STANDARD | WERKSTOFF NR. | UNS |
| 2507 | 1.4410 | S32750/S32760 |
Chemical Composition of Super Duplex Stainless Steel S32750 Pipe Fittings in Japan
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| S32750 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
| S32760 | 0.05 max | 1.00 max | 1.00 max | 0.030 max | 0.010 max | 24.00 – 26.00 | 3.00 – 4.00 | 6.00 – 8.00 | 0.20 – 0.30 | 57.61 min |
Mechanical Properties of SDSS Buttweld Fittings in Japan
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 | 15 % |
Super Duplex Pipe Fittings Production Range in Japan
Super Duplex Stainless Steel Buttweld Fittings Production Range in Japan
Super Duplex UNS S32760 Pipe Elbow in Japan
Super Duplex Stainless Steel S32750 Buttweld Elbow in Japan
UNS S32750 SDSS Buttweld Elbow in Tokyo
2507 Buttweld Elbow in Kobe
UNS S32760 3D Elbow in Sakai
S32760 Buttweld Seamless Elbow in Japan
1.4410 Buttweld Welded Elbow Dealer in Osaka
Super Duplex S32750 90 Deg Butt weld Elbow in Japan
SAF 2507 Super Duplex Steel 45 Degree Buttweld Elbow in Japan
Super Duplex Stainless Steel 1.4410 180 Deg. Buttweld Elbow Distributor in Japan
Super Duplex Stainless Steel UNS S32760 5D Buttweld Elbow Supplier in Japan
S32760 10D Buttweld Elbow Supplier in Osaka
ASTM A815 SDSS 2507 Butt weld Elbow in Japan
ANSI B16.9 SDSS SAF 2507 Butt weld Elbow in Osaka
Super Duplex 2507 Buttweld Tee in Japan
2507 Super Duplex Buttweld Tee in Osaka
2507 Buttweld Tee Supplier in Japan
S32750 Equal Tee Dealer in Amagasaki
SAF 2507 Buttweld Tee Distributor in Japan
SDSS UNS S32760 Buttweld Tee Stockholder in Japan
UNS S32750 Super Duplex Buttweld Seamless Tee in Osaka
Super Duplex Steel 2507 Buttweld Welded Tee Manufacturer in Sakai
SDSS 2507 Buttweld Two Joint Tee in Japan
Super Duplex Steel SAF 2507 Butt weld Unequal Tees in Japan
S32760 Super Duplex Stainless Steel Buttweld Reducing Tee Stockist in Japan
ASME SA815 2507 Butt weld Tee in Tokyo
ANSI B16.9 1.4410 Butt weld Tee in Osaka
Super Duplex Steel SAF 2507 Buttweld Cross in Japan
S32760 SDSS Buttweld Cross in Tokyo
2507 Buttweld Cross in Japan
SAF 2507 Equal Cross Dealer in Sakai
SAF 2507 Buttweld Cross Supplier in Japan
Super Duplex Steel S32760 Buttweld Cross Stockist in Japan
UNS S32760 Super Duplex Stainless Steel Buttweld Seamless Cross in Japan
Super Duplex 2507 Buttweld Welded Cross Stockholder in Kobe
Super Duplex Steel UNS S32750 Buttweld Two Joint Cross in Osaka
Super Duplex S32750 Butt weld Unequal Cross in Tokyo
UNS S32760 Super Duplex Stainless Steel Buttweld Reducing Cross in Osaka
ASTM A815 1.4410 Butt weld Cross in Japan
ANSI B16.9 S32750 Butt weld Cross in Tokyo
SDSS SAF 2507 Pipe Reducer in Japan
Ferritic Stainless Steel SAF 2507 Buttweld Reducer in Tokyo
Super Duplex Buttweld Reducer Supplier in Osaka
UNS S32760 Buttweld Reducer in Kobe
UNS S32760 Pipe Reducer Stockist in Japan
S32760 Buttweld Reducer Dealer in Japan
S32750 Buttweld Reducer in Japan
1.4410 Super Duplex Buttweld Seamless Reducer in Tokyo
Super Duplex Stainless Steel UNS S32750 Buttweld Welded Reducer in Osaka
Super Duplex 2507 Buttweld Two Joint Reducer in Kobe
Super Duplex SAF 2507 Concentric Reducer in Japan
1.4410 Super Duplex Steel Eccentric Reducer in Japan
ASTM A815 S32760 Butt weld Reducer in Tokyo
ANSI B16.9 UNS S32750 Butt weld Reducer Manufacturer in Osaka
Super Duplex 2507 Pipe Cap in Japan
Ferritic Stainless Steel Buttweld Cap in Kobe
1.4410 Super Duplex Steel Buttweld Cap in Tokyo
2507 Buttweld End Cap in Japan
2507 Pipe Cap Stockist in Japan
SAF 2507 Buttweld Pipe End Cap in Japan
SAF 2507 Buttweld Pipe Cap Manufacturer in Japan
Super Duplex Stainless Steel 1.4410 Seamless Pipe Cap in Kobe
Super Duplex S32750 Buttweld Welded Cap in Tokyo
Super Duplex Steel S32760 Buttweld Two Joint Cap in Tokyo
SDSS UNS S32750 Butt weld End Pipe Cap in Japan
UNS S32760 Buttweld Cap Supplier in Tokyo
ASME SA815 S32760 Butt weld Cap in Kobe
ANSI B16.9 SAF 2507 Butt weld Cap Dealer in Tokyo
SDSS S32750 Pipe Bend in Japan
Super Duplex Steel 2507 Buttweld Bend in Tokyo
UNS S32760 Super Duplex Steel Buttweld Bend in Kobe
S32760 Buttweld Bend in Osaka
UNS S32760 Pipe Bend in Amagasaki
2507 Buttweld Seamless Bend in Japan
Super Duplex 1.4410 Buttweld Bend Dealer in Japan
Super Duplex Stainless Steel Seamless Long Radius Bends Manufacturer in Osaka
Ferritic Stainless Steel Buttweld Welded Bend in Tokyo
SDSS UNS S32760 Buttweld Two Joint Bend in Kobe
Super Duplex Stainless Steel 2507 Long Radius Bends Distributor in Japan
S32760 Super Duplex Steel Steel Piggable Bend in Japan
ASTM A815 S32760 U Pipe Bends in Osaka
ANSI B16.9 S32750 Hot Induction Bend in Kobe
Price List of ANSI B16.9 Super Duplex Stainless Steel Buttweld Pipe Fittings in Japan
Prices for Super Duplex Stainless Steel Pipe Fittings Products are very affordable.
Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement.
KALIKUND STEEL & ENGG. CO. maintains a stock of all standard items and can supply them at the best price ASME SA 815 SAF 2507 SDSS Buttweld Fittings, Buttweld Elbow, Reducer, Tee, Cross, Stub End, Pipe Bend, Seamless Buttweld Pipe Fittings, Weldable, Welded Pipe Fittings etc.
Super Duplex S32750 Buttweld Pipe Fittings Ready Stock in Japan
| SDSS S32750 90° LR Elbow in Japan | 1.4410 Super Duplex Seamless Buttweld Fittings in Amagasaki |
| Super Duplex Steel 90° Weldable SR Elbow in Kadoma | Super Duplex Steel UNS S32760 Pipe Reducers in Japan |
| ASME B16.9 Super Duplex Steel S32760 90° Reducing Elbow in Kobe | Ferritic Stainless Steel Welded Buttweld Fittings in Japan |
| Super Duplex Stainless Steel UNS S32760 Stub End in Tokyo | ASME SA815 Super Duplex Stainless Steel UNS S32750 Caps in Japan |
| Super Duplex Stainless Steel 1.4410 Buttweld Fittings Stockholder in Kobe | A815 UNS S32760 Two Joint Buttweld Fittings Supplier in Osaka |
| 1.4410 Reducing Tee Supplierin Amagasaki | ASME SA815 SAF 2507 Lateral Tee Stockholder in Kadoma |
| Super Duplex UNS S32750 Concentric Reducer in Osaka | SDSS S32760 Welded Buttweld Fittings Dealer in Japan |
| Ferritic Stainless Steel 2507 Eccentric Reducer Supplier in Osaka | A815 SAF 2507 Industrial Pipe Fittings in Japan |
| ANSI B16.9 SDSS SAF 2507 Pipe Cap in Japan | 2507 SDSS Weldable 3D Elbow Stockist in Tokyo |
| SAF 2507 SDSS 180° Buttweld Elbow in Osaka | Super Duplex Stainless Steel UNS S32760 Lap Joint Stub Ends in Japan |
| SDSS UNS S32760 45° Long Radius Elbow in Kobe | Super Duplex Stainless Steel SAF 2507 Short Radius Elbow Stockholder in Tokyo |
| S32750 Pipe Bends Supplier in Japan | UNS S32750 Super Duplex Stainless Steel Pipe Elbow in Kobe |
| UNS S32750 Super Duplex Stainless Steel 180° LR Return Bend Distributor in Osaka | UNS S32760 Super Duplex Seamless Reducing Tee in Japan |
| S32760 Ferritic Stainless Steel Seamless Fittings in Tokyo | Super Duplex 1.4410 1D Elbow/3D Elbow/5D Elbow Manufacturer in Japan |
| SDSS SAF 2507 Weldable 1.5D Elbow in Kobe | UNS S32760 Super Duplex Two Halve Butt weld Fittings in Japan |
| Super Duplex Stainless Steel UNS S32750 Stub End Stockholder in Osaka | 2507 Super Duplex Stainless Steel Buttweld Reducing Nipple in Japan |
| Super Duplex Steel S32760 Seamless Buttweld Fittings Distributor in Japan | Sch 80 Super Duplex UNS S32750 Buttweld Fittings in Kobe |
| ASTM A815 Super Duplex Stainless Steel UNS S32760 Eccentric Reducer in Osaka | ASME B16.9 Super Duplex Stainless Steel 2507 10D Elbow in Japan |
| 2507 Super Duplex Steel Two Joint Buttweld Fittings in Tokyo | 1.4410 Super Duplex Stainless Steel LR Elbow in Japan |
| Super Duplex Stainless Steel S32750 Wrought Austenitic 45 Degree Elbow in Japan | ASME SA815 UNS S32750 Welded Buttweld Fittings in Kobe |
| 2507 SDSS 90° Seamless Elbow Dealer in Kobe | Super Duplex Steel SAF 2507 Pipe Fittings Distributor in Osaka |
| Super Duplex 2507 Buttweld Fittings Stockist in Sakai | Super Duplex Steel SAF 2507 Pipe Fittings Distributor in Kadoma |
| Super Duplex UNS S32760 Equal Cross Exporter in Kadoma | Stockholder of SAF 2507 Ferritic Stainless Steel End Pipe Cap in Osaka |